Online

Ammonia Refrigerant Safe Handling

Network: 
Refrigeration Skillnet
Location of Course TBA
Trainer Refrigeration Skillnet has partnered with Glen Greenbank of PRTC. Glen is the leading expert in R717 in UK & Ireland.
Methods of Assessment Theory & Practical Exam
Download Application Form http://goo.gl/ieC93
Further Enquiries Tel: 01 885 5200
Email: info@refrigerationskillnet.ie
Entry Requirements Candidates should be experienced refrigeration engineers. In particular, they should already be experienced in dealing with Ammonia as time does not allow for practical training.
Careers or Further Progression Level 3 Certificate in Refrigeration and Air Conditioning
C&G2079 F-Gas Regulations
Course Content • Use of safety equipment and the implications of safety standards and legislation
• Storage and movement of ammonia
• Charging of liquid ammonia
• Recovery of liquid ammonia
• Breaking into systems
• Purging lines / systems
• Risk assessment & method statements
• Work Permits
• Emergency procedures / equipment
Financial Support Subsidised for Refrigeration Skillnet member companies Fully subsidised for job-seekers
Enrolment and Start Dates Comment http://goo.gl/ieC93
Duration 2 days
Comment Includes City & Guilds 2078 Parts 2&3
Course Web Page: 
http://issuu.com/refrigerationskillnet/docs/ammonia20778?mode=window&viewMode=singlePage
Available to Job Seekers: 
Yes
Certified: 
Yes

Brazing Approval

Network: 
Refrigeration Skillnet
Location of Course Refrigeration Skillnet Training Centre, Northwest Centre, Blanchardstown
Trainer South Eastern Regional College
Methods of Assessment Theory & Practical exam
Download Application Form http://alturl.com/nfn6d
Eligibility All personnel who wish to demonstrate their brazing competence. Persons involved in the installation, service and maintenance of Refrigeration or HVAC plant. Persons wishing update their brazing skills or progress with the RAC industry.
Further Enquiries Tel: 01 885 5200
Email: info@refrigerationskillnet.ie
Entry Requirements National Craft Certificate (or equal) (or) Level 2 Certificate in RAC (City & Guilds 6172-200) (and) Equivalent experience
Careers or Further Progression Level 3 Certificate in Refrigeration and Air Conditioning C&G2079 F-Gas Regulations
Course Content This course is not an introduction to brazing. Participants should have completed appropriate brazing training in the past and should be experienced at brazing on the pipe work described below. The course focuses on allowing participants to demonstrate their brazing competence and includes only a brief revision of basic principles and practice.

To reduce workplace absence this course is delivered through our innovative blended learning programme, with 2 sessions, complimented with self directed learning with:
• Self directed learning materials
• Online support
• Group tutorials
• Practical workshops

Financial Support Subsidised for Refrigeration Skillnet member companies Fully subsidised for job-seekers
Enrolment and Start Dates Comment See upcomming dates or book: http://alturl.com/nfn6d
Subjects Taught On Completion the trainee will :
1. Be able to identify and explain what information is needed in the production of a Brazing Procedure Specification (BPS) as required for specific contracts.

2. Be able to draw up a Brazing Procedure Specification for copper to copper joints and copper to steel joints.

3. Be able to explain and demonstrate the basic principles of brazing.

4. Be able to explain the various processes which take place during brazing.

5. Practice good housekeeping rules with regard to the environment and their own safety.

6. Be able to identify the acceptance criteria to meet the required standard and recognise in their own work where they might be weak as per the standards.

7. Braze to specification and in accordance with the PED copper to copper joints (⅝" copper to copper, ⅞" copper to copper: Level 2, 1 ⅜" copper to copper, 1 ⅝" copper to copper: Level 3)

8. Certified to EN378:2008

Duration 2 days
Comment The Pressure Equipment Directive (PED) requires that manufacturers / contractors carrying out brazing work on pressure equipment use an approved Brazing Procedure Specification (BPS) and certify that their brazers are competent to carry out their work in accordance with the approved BPS. Electro-Technical Council Level 2 Certification up to ⅞” Copper Electro-Technical Council Level 3 Certification up to 1⅝” Copper
Course Web Page: 
http://issuu.com/refrigerationskillnet/docs/ts010brazingapproval?mode=window&viewMode=singlePage
Available to Job Seekers: 
Yes
Certified: 
Yes

Manual Handling Instructor

Network: 
Refrigeration Skillnet
Location of Course Refrigeration Skillnet Training Centre, Northwest Centre, Blanchardstown
Trainer Qualtec Ltd
Learning Outcomes On completion of this course learners will be able to:
• Explain the main components of relevant health and safety legislation
• Define the main components of the spinal column
• Explain the main risk factors for back injuries related to manual handling
• Describe the concepts of ergonomics
• Explain the manual handling risk assessment process
• Carry out manual handling risk assessments
• Describe a range of controls to avoid and reduce the risk of injuries
• Apply the main principles of inanimate manual handling to a range of manual handling tasks
• Analyse the learners performance of manual handling techniques
• Develop inanimate manual handling training programmes
• Deliver effective manual handling training programmes
• Demonstrate understanding of adult learning principles
• Give effective instruction in practical manual handling techniques
Further Enquiries Tel: 01 885 5200
Email: info@refrigerationskillnet.ie
Entry Requirements Working knowledge of Health & Safety requirements
Course Content The purpose of this course is to equip the learner with the knowledge, skill and competence to conduct manual handling risk assessments and to design and deliver manual handling instruction in the workplace. This is an intensive course and highly participative. It addresses both the theoretical and practical aspects of manual handling and the skills of providing instruction.
Financial Support Subsidised for Refrigeration Skillnet member companies
Fully subsidised for job-seekers
Enrolment and Start Dates Comment Please see contact detail below
FETAC Code 6S0242: Manual Handling Instruction
Subjects Taught Unit 1 Legislative requirements and health benefit
Unit 2 Anatomy and back care
Unit 3 Ergonomic principles and risk assessment
Unit 4 Manual handling principles and techniques
Unit 5 Planning and design of manual handling training programmes
Unit 6 Delivery of manual handling training
Duration 5 days (3 days week 1, 2 days week 2)
Comment The Safety, Health and Welfare at Work Regulations 2007 require that all companies: (1) Carry out a manual handling risk assessment; (2) take appropriate steps to avoid or reduce manual handling risks; and (3) provide manual handling training to relevant staff.

But bringing in external consultants to carry our risk assessments and to provide training can be expensive and time-consuming. The solution? Send a select few on a manual handling instructor course and let them become instructors themselves. For a small outlay, you could save vast amounts of money by getting your own staff to train new members of the team. Not only will you benefit from the cost savings, but you will reap the benefits from your newly skilled staff who will appreciate the investment in them.

Number of Places 10
Course Fee €450 Subsidy for Refrigeration Skillnet Members
Course Web Page: 
http://www.refrigerationskillnet.ie/course_schedule.shtml
Available to Job Seekers: 
Yes
Certified: 
Yes

F-Gas & ODS Regulations C&G 2079 Cat I

Network: 
Refrigeration Skillnet
Location of Course Refrigeration Skillnet Training Centre, B6 Centrepoint, Rosemount Business Park, Ballycoolin, Dublin 11.
Trainer George Condell
Methods of Assessment Practial Workshop Asseeement & On-line Theory Assessment
Learning Outcomes • Understand health, safety, communications issues in the Mechanical Engineering Sector (MES) and it’s main bodies and organisations
• Interpret drawings, specifications, data and describe the use of I.T. in the sector
• Describe the tools and the work processes used in the MES sector.
• Calculate and quantify from drawings and mark and set out refrigeration plant.
• Understand construction methods and the materials used in the MES sector.
• Describe the structure and organisation of the RAC industry and its contribution to GDP.
• Explain the relationship between cooling systems, energy usage and the environment.
• Describe and explain cooling systems and technology.
• Explain the basic science of cooling and use charts to calculate quantities.
• Describe and explain small cooling system electrics, electronics and controls.
• Describe and explain brazing principles and processes.
Download Application Form http://alturl.com/szuhn
Eligibility Blended learning course: internet access required.

Note this course is a blended learning course and internet access is required.

Minimum requirements: Explorer / Mozilla, adobe reader, flash player.

Further Enquiries Tel: 01 885 5200
Email: info@refrigerationskillnet.ie
Entry Requirements Working within Refrigeration or Air Conditioning.
Careers or Further Progression Level 2 Certificate in Refrigeration and Air Conditioning
Course Content The aim of this course is to provide the experienced engineer with the knowledge, skills and certification to work on the installation, service, maintenance, recovery and leak checking of stationary refrigeration, air conditioning or heat pump equipment that contains refrigerants classified as either fluorinated gasses (F-Gas) or Ozone Depleting Substances (ODS).

Workplace absence is reduced through our innovative blended learning programme, training is delivered with 3 day classroom training and 1 day assessment with:
• Self learning materials
• Online support
• 1:1 tutorials
• Group tutorials
• Practical workshops

Financial Support Subsidised for Refrigeration Skillnet member companies Fully subsidised for job-seekers (Subject to suitability and place availability)
Enrolment and Start Dates Comment Course Dates: 21st / 22nd May / 4th / 5th June 2013
Full Course
Subjects Taught • Identify basic terms, principles, units, theory and thermodynamics of vapour compression cycles and refrigerants.
• Identify the causes and effects of global warming and climate change.
• Identify causes and effects of ozone depletion.
• Identify stationary refrigerant, air conditioning and heat-pump system components, functions and leakage risk.
• Identify the hazards and safe working practices for the installation, commissioning and handling of refrigerants.
• Fabricate, braze and examine pipework.
• Undertake pressure testing, evacuation and record completion.
• Undertake refrigerant charging, leak checking and record keeping.
• Recovery and disposal preparation of refrigerant and oil.
Duration Two days during week one, 12 days distance study and two days week two which includes assessments .
Number of Places 6
Course Fee €849.00
Course Web Page: 
http://www.refrigerationskillnet.ie/bookatrainingcourse.shtml
Available to Job Seekers: 
Yes
Certified: 
Yes

Precursive Course - Level 3

Network: 
Refrigeration Skillnet
Location of Course Refrigeration Skillnet Training Centre, Northwest Centre, Blanchardstown
Trainer South Eastern Regional College (SERC) Refrigeration Skillnet
Methods of Assessment Online City & Guilds Examination
Learning Outcomes • Understand health, safety, communications issues in the Mechanical Engineering Sector (MES) and it’s main bodies and organisations
• Interpret drawings, specifications, data and describe the use of I.T. in the sector
• Describe the tools and the work processes used in the MES sector.
• Calculate and quantify from drawings and mark and set out refrigeration plant.
• Understand construction methods and the materials used in the MES sector.
• Describe the structure and organisation of the RAC industry and its contribution to GDP.
• Explain the relationship between cooling systems, energy usage and the environment.
• Describe and explain cooling systems and technology.
• Explain the basic science of cooling and use charts to calculate quantities.
• Describe and explain small cooling system electrics, electronics and controls.
• Describe and explain brazing principles and processes.
Eligibility Appropriate experience in RAC
Further Enquiries Tel: 01 885 5200
Email: info@refrigerationskillnet.ie
Entry Requirements City & Guilds 2079(Cat I) Minimum 3 years experience in Refrigeration & Air conditioning
Careers or Further Progression Level 3 Certificate in Refrigeration and Air Conditioning
Course Content Certificate in Refrigeration & Air Conditioning Level 2:
The aim of this course is to provide the learner with the knowledge and skills to select, install, commission, maintain and service refrigeration plant used in commercial refrigeration, air conditioning and heat pump equipment.

Through our innovative blended learning programme, training is delivered over 12 fortnightly 2 day sessions, thus reducing workplace absence though:
Self learning materials
Online support
1:1 tutorials
Group tutorials
Practical workshops

Financial Support Subsidised for Refrigeration Skillnet member companies Fully subsidised for job-seekers
Enrolment and Start Dates Comment To book: http://alturl.com/snmh9
Duration 2 weeks
Comment Thursday & Friday's fortnightly with blended learning
Course Web Page: 
http://www.refrigerationskillnet.ie/
Available to Job Seekers: 
Yes
Certified: 
No

Mobile Air Conditioning (Automotive) Refrigerant Handling

Network: 
Refrigeration Skillnet
Location of Course Refrigeration Skillnet Training Centre, Northwest Centre, Blanchardstown

or on site

Trainer South Eastern Regional College
Learning Outcomes 1. Understand the function, layout and operating principles of mobile air conditioning systems, including the components, equipment, tools for system recovery, vacuum, recharging and flushing.
2. Understand the procedures required for service and general maintenance.
3. Understand the environmental implications, legal, equipment, procedures and Health and Safety requirements for storage, refrigerant identification, refrigerant recovery, system evacuation, adding oil refrigerant recharging, final leak detection, flushing and disposal of Mobile Air Conditioning refrigerants and components.
4. Competency in refrigerant identification, initial system evaluation – testing, via pressure gauges, temperature, air distribution and speed. Recovery, vacuum check, leak detection, visual, electronic, oil injection and charging for service and general maintenance and repair procedures for both thermal expansion valve or fixed orifice tube air conditioning systems.
Further Enquiries Tel: 01 885 5200
Email: info@refrigerationskillnet.ie
Entry Requirements Working knowledge of automotive mechanical or electrical systems
Careers or Further Progression City & Guilds (5101) Level 3: Unit 1 Refrigerant Handling for Mobile Air Conditioning Systems
Course Content Gain the knowledge skills required to handle refrigerants used in mobile air conditioning (M.A.C.) which are classified as either fluorinated gasses (F-Gas) or Ozone Depleting Substances (ODS) This is necessary for the service, maintenance, recovery and leak checking of mobile air conditioning.
Through our innovative blended learning programme, training is delivered via one-day training sessions, reducing workplace absence though:
 Self-directed distance learning
 Online support & learning materials
 Group tutorials
 Practical workshops and visual aids
Financial Support Subsidised for Refrigeration Skillnet member companies
Fully subsidised for job-seekers
Enrolment and Start Dates Comment to book call 01 8855200
Subjects Taught • Refrigerant handling • Service • leak detection • Refrigerant recovery
Duration 1 day
Comment 1 day blended learning, also available in house
Course Web Page: 
http://www.refrigerationskillnet.ie/
Available to Job Seekers: 
Yes
Certified: 
Yes

Refrigeration & Air Conditioning - Level 3 (large complex systems)

Network: 
Refrigeration Skillnet
Location of Course Refrigeration Skillnet Training Centre, Northwest Centre, Blanchardstown
Trainer South Easter Regional College (SERC) Refrigeration Skillnet
Methods of Assessment The outcome of this unit will be assessed multiple by two multiple choice assessment papers.
There will be two tests synoptically written which will cover the content of the four outcomes.
These written tests will be externally set and externally marked.
Learning Outcomes 1. Energy and the Environment
a) Calculate TEWI (Total Environmental Warming Impact)
b) Compare and contrast TEWI for a variety of different refrigerants applied to the same cooling capacity and operating temperatures.
c) Describe the methods to improve energy efficiency on existing systems within the range.

2. Cooling Systems and Technology
a) Describe system layout and operating principles for multi compressor pack systems with capacity control.
b) Describe system layout and operating principles for multi evaporator systems with independent control for each evaporator.
c) Explain the principles of:
- oil separation, recovery and rectification
- hot ‘gas’, saturated ‘gas’ and electric defrost systems
- pumped liquid recirculation systems
- variable refrigerant volume/flow systems
d) Describe the main operating features and characteristics of each of the following compressor systems.
- screw
- scroll
- centrifugal
- rotary
e) Describe the features and characteristics of expansion devices in current use.
f) Describe the operating principles and application of suction pressure, evaporating pressure and crankcase pressure regulating valves
g) Describe the system layout and operating principles for water chilling systems
h) Describe the system layout and operating principles for central air conditioning systems

3. Cooling Science and Calculations
a) Compare and contrast system performance at a variety of conditions using pressure enthalpy diagrams.
b) Compare and contrast air conditioning processes using the psychrometric chart
c) Apply equipment and components to cooling applications to allow system selection, design and balancing to be carried out
d) Describe the effect of heat and vapour transfer to insulated structures
e) Compare and contrast the use of different refrigerant types in cooling applications
f) Explain the features and characteristics of zeotropic blends, azeotropes and single fluid refrigerants.
g) Assess heat loads to insulated cooled applications
h) Explain Dalton’s Law of Partial Pressures
i) Describe Boyles Law Charles’ Law and the Combined Gas Equation.

4. Cooling System Electrics, Electronics and Controls
a) Describe electrical circuits for systems in the range
b) Explain the principles of electronic monitoring systems (EMS) and building monitoring systems (BMS). c) Describe the principles of single phase and three phase motor and motor control and protection circuits.
d) Describe the requirements of the Electricity at Work Regulations and the Institute of Electrical Engineering Regulations.
e) Trace and explain electrical circuit diagrams for systems in the range.

Eligibility This course is open to trainees with experience in the Refrigeration and Air conditioning industry.
Further Enquiries Tel: 01 885 5200
Email: info@refrigerationskillnet.ie
Entry Requirements City & Guilds 6127 Level 2 & City & Guilds 2079 C(Cat I) or City & Guilds 2079(Cat I)& 3 year industry experience & Level 3 Percussive Course
Careers or Further Progression Level 3 Certificate in Refrigeration and Air Conditioning
C&G2079 F-Gas Regulations
Course Content Certificate in Refrigeration & Air Conditioning - Level 3 (large complex systems):
The aim of this course is to provide the learner with the knowledge and skills to select, install, commission, maintain and service refrigeration plant used in large and complex commercial refrigeration, air conditioning and heat pump equipment.

Through our innovative blended learning programme, training is delivered over 12 fortnightly 2 day sessions, thus reducing workplace absence though:
Self learning materials
Online support
1:1 tutorials
Group tutorials
Practical workshops

Financial Support Subsidised for Refrigeration Skillnet member companies. Fully subsidised for job-seekers
Enrolment and Start Dates Comment To book: http://alturl.com/snmh9
Subjects Taught 1. Compare and contrast factors which affect energy efficiency and total environmental
warming impact.
2. Describe complex cooling system technology
3. Use applied cooling science to carry out load, performance and equipment selection calculations.
4. Describe and explain cooling system electrotechnics and control.

This course extends the knowledge and understanding required for units:
1. Maintain safe working environment for HVACR activities
2. Maintain effective working relationships
3. Contribute to the improvement of business products and services for HVACR activities.
10. Plan complex RAC work activities
11. Commission and de-commission complex RAC systems
12. Install complex RAC systems and components
13. Service and maintain complex RAC systems and components

Duration 28 weeks
Comment See also Level 3 Percussive Course
Level 2 Certificate in Refrigeration & Air Conditioning
Course Web Page: 
http://www.refrigerationskillnet.ie/
Available to Job Seekers: 
Yes
Certified: 
Yes

F-Gas & ODS Regulations C&G 2079 Cat I Masterclass

Network: 
Refrigeration Skillnet
Location of Course Refrigeration Skillnet Training Centre,
Unit 7 Northwest Centre,
Northwest Business Park,
Blanchardstown,
Dublin 15.
Trainer George Condell
Methods of Assessment Theory and Practical
Learning Outcomes • Identify basic terms, principles, units, theory and thermodynamics of vapour compression cycles and refrigerants.
• Identify the causes and effects of global warming and climate change.
• Identify causes and effects of ozone depletion.
• Identify stationary refrigerant, air conditioning and heat-pump system components, functions and leakage risk.
• Identify the hazards and safe working practices for the installation, commissioning and handling of refrigerants.
• Fabricate, braze and examine pipework.
• Undertake pressure testing, evacuation and record completion.
• Undertake refrigerant charging, leak checking and record keeping.
• Recovery and disposal preparation of refrigerant and oil.
Download Application Form http://alturl.com/szuhn
Eligibility Suitable for Experienced Refrigeration & Air Conditioning Engineers.

Blended learning course: internet access required

Note this course is a blended learning course and internet access is required.

Minimum requirements: Explorer / Mozilla, adobe reader, flash player.

Further Enquiries Tel: 01 885 5200
Email: info@refrigerationskillnet.ie
Entry Requirements Recommended:
Craft Certificate or C&G2078 or C&G6127 L2 or FETAC Principles of RAC or appropriate experience.
Course Content The aim of this course is to provide the experienced engineer with the knowledge, skills and certification to work on the installation, service, maintenance, recovery and leak checking of stationary refrigeration, air conditioning or heat pump equipment that contains refrigerants classified as either fluorinated gasses (F-Gas) or Ozone Depleting Substances (ODS)

Workplace absence is reduced through our innovative blended learning programme, training is delivered with 1 day classroom training and 1 day assessment with:
• Self learning materials
• Online support
• 1:1 tutorials
• Group tutorials
• Practical workshops

Financial Support €200.00 subsidy for Refrigeration Skillnet Network members
Job Seekers fully subsidised
Enrolment and Start Dates Comment Course starts on Thursday 24th January 2013 with assessments practicle & theory on 1st February 2013

Course Starts:Thursday 7th March 2013 with assessments practicle & theory on Thursday 14th March 2013

Duration 2 days classroom + blended learning
Number of Places 6
Course Fee €595.00
Course Web Page: 
http://issuu.com/refrigerationskillnet/docs/rt010fgas2079?mode=window&viewMode=singlePage
Available to Job Seekers: 
Yes
Certified: 
Yes

Supervisory Management

Network: 
Outsourcing Skillnet
Location of Course TBD
Methods of Assessment Assignment 30%
Skills demonstration 70%
Learning Outcomes Learners who successfully complete this module will:

o Gain awareness of the role and practice of supervisor / team leader
o Develop knowledge of the key principle and application of communications
o Develop skills in performing the role and applying key elements of employment legislation
o Develop techniques for undertaking operational work planning and control
o Be able to build appropriate plans and schedules for work activities with timescales and measurement criteria
o Develop effective team working and leadership skills for managing people
o Be able to address poor performance issues and achieve satisfactory performance outcomes
o Develop good personal and time management techniques and effective management of meetings
o Be capable of practicing delegation skills in the management of workloads

Eligibility NC093: Supervisory Management
Further Enquiries outsourcing@ccma.ie or 01-2911960
Entry Requirements Participants must hold a Leaving Certificate, Equivalent Qualification (Level 4) and / or have relevant life and work experience.
Course Content This course is available in e-learning and classroom.

The programme is designed to develop learners’ understanding of supervisory / team leader roles so as to better perform their supervisory function and goals.

Subjects Taught Participants will develop a range of supervisory and management skills that will enable them to deal with a variety of people and systems issues and execute their leadership role in an effective and successful manner.
Duration 5 training days of 6.5 hours per day
Available to Job Seekers: 
Yes
Certified: 
Yes

Business Management

Network: 
Outsourcing Skillnet
Location of Course TBC
Methods of Assessment Two assignments (25% each) and a Project (50%):
Assignment 1
An investigation and evaluation into the internal and external environment of your business.

Assignment 2
An investigation and evaluation into a topic appropriate to human resources, with reference to appropriate behavioural theories.

Project
A brief will be provided enabling you to demonstrate your ability to analyse, evaluate, conclude and make recommendations on issues that relate to business management. You must compile a report to show your understanding of the management process within your organisation.

Learning Outcomes Learners who successfully complete this module will be able to:

o Identify the factors that impact your business both positively and negatively
o Manage people and company resources more effectively,
o Identify what drives employees and devise development and management strategies and initiatives
o Understand key employment legislation, obligations and compliance issues
o Plan for future success – Personal, Team & Company goals and targets

Further Enquiries outsourcing@ccma.ie or 01-2911960
Entry Requirements Participants must hold a Leaving Certificate, Equivalent Qualification and / or have relevant life and work experience.
Course Content This course is available in e-learning and classroom.

This Business Management Programme has been designed to equip participants with the essential skills, knowledge and tools required to drive their business forward. Training Experts will guide participants through the topical and relevant course material. Participants will be able to identify the critical factors that impact the business and will equip them with the core skills to enable them to react in both a responsive and effective manner.

Enrolment and Start Dates Comment Contact Course Provider for Upcoming Dates.
FETAC Code B30139: Business Management
Subjects Taught Programme Content:

Unit 1 – The Role of the Manager
Unit 2 – Company Structure Types
Unit 3 – Employment Legislation
Unit 4 – Recruitment & Induction
Unit 5 – Performance Management
Unit 6 – People Management
Unit 7 - Communication and Influencing
Unit 8 – Team Building
Unit 9 – Time Management
Unit 10 – Planning & Goal Setting

Duration 5 Days
Course Fee €895.00
Available to Job Seekers: 
Yes
Certified: 
Yes
Syndicate content